Guides · Planning
Ask ten installers how many cameras a property needs and you may get ten answers. The honest answer depends on the property, but it comes from a simple method, not guesswork. Start with what you need to see, work backward to the views required, and only then count cameras. With AI-based cameras, which can tell people and vehicles from shadows, you can often cover a property well with fewer devices than older motion-only systems needed.
Write down what you want the system to do. Common goals include seeing who approaches the front door, catching package theft, watching a driveway or parking area, monitoring a rear entry, and keeping an eye on a backyard or loading area. Each goal translates into a view. A camera that does not serve a stated goal is usually a camera you do not need.
Most intrusions and thefts involve an entry point: doors, ground-floor windows, garage doors, and gates. Sketch the property and mark each one. Then mark the paths people and vehicles use to reach them. The first cameras should cover the front door, the driveway or approach, and any rear or side door that is out of view from the street. For many small homes, that is two to four cameras.
A single camera can serve two different purposes, and they need different setups. A wide view gives awareness: you can see a vehicle arriving and what direction someone walked from. A tighter view at a door or gate gives identification: a face or a license plate large enough in the frame to be useful. If you want both at one location, you may need two cameras or a carefully chosen position. Pixels on target matter more than total resolution, so think about distance from the subject.
Good coverage means a person moving along a path does not disappear between cameras. A modest overlap at the edges of views lets you follow movement and helps AI features such as person tracking. Walk the site and look for gaps: the side yard behind a fence, the corner behind a column, the space beside a parked truck. If a gap leads to an entry point, cover it. If it does not, you may decide to accept it.
These are planning ranges, not rules. A small apartment or condo often works with one camera at the entry and perhaps one inside. A typical single-family home commonly uses a front door camera, a driveway or garage view, and one or two covering the back and side access. A small shop might use an entrance camera, a counter or register view, a stockroom or back door camera, and one outside. A warehouse or lot needs coverage planned by lanes, doors, and perimeter length, and the count rises accordingly.
Every camera adds mounting work, power or network needs, and notifications to manage. Wired power and network drops, Wi-Fi strength at the mounting point, and weather exposure all affect where a camera can go. Also think about privacy: point cameras at your own property and avoid capturing neighbors' windows or yards where possible. Privacy masks can help.
You do not have to buy the final system on day one. Install the cameras for your highest-priority views, run them for a few weeks, and review the footage and alerts. You will quickly see where you wish you had a view and where a camera is mostly watching an empty wall. AI detection tuned to people, vehicles, and packages will also show whether the placement produces useful alerts or noise. Add cameras where the evidence says you need them.
The right number of cameras is the number that covers your entry points, gives you the views you need for awareness and identification, and leaves no gap on the paths to those entries. Plan from goals, check overlap, start with the essentials, and expand based on what you learn.
Sentrick Shield is launching soon. Shield is camera-based and does not use GPS.