Guides · Camera Health
A security camera only protects a property while it can see. Anyone who plans to do harm knows this, which is why the first move is often to deal with the camera: a hat pulled over the lens, a coat of spray paint, a push that turns the housing toward the sky, or a quiet cut to the power. Tamper detection is the feature that notices these moves and tells you straight away, so a blinded camera does not stay blinded for days.
Tampering is any change that reduces what a camera can see or record without the camera being switched off in the normal way. The common forms are physical blocking of the lens, defocusing or smearing it, changing the viewing angle, shining a strong light into the sensor, and cutting the power or network cable. Each one produces a different signature, which is why a good system looks for several signals rather than one.
Most tamper detection works by comparing what the camera sees now against what it normally sees. A few signals matter most:
Basic tamper alerts are famously noisy. A sunrise, a headlight sweeping across the lens or a spider web near the sensor can all look like tampering to a simple brightness rule. A behavioral model adds context. It can tell the difference between a gradual lighting change and a person standing at the camera, and it can connect the two events: someone walked into view, reached toward the lens, and the picture went dark. That sequence is far more meaningful than a dark frame on its own, and it gives the person reviewing the alert something concrete to act on.
It is worth being clear about the limits. Detection tells you that the camera was interfered with; it does not stop the interference. A camera that has been covered still needs someone to respond. Tamper alerts also depend on the device being able to send them, so a camera with no power and no battery backup may only be noticed when it stops checking in. Planning for that gap is part of a sound design, not an afterthought.
When an alert arrives, look at the last clean frames before it. If a person is visible near the camera, treat it as an active event. If nothing precedes it, suspect a fault, weather or a lighting change, and still send someone to check, because a quiet failure and a quiet attack look identical until you look at the device.
Tamper detection protects the protection. It does not replace good mounting, overlapping coverage or a response plan, but it closes the window in which a defeated camera goes unnoticed. For any business that relies on cameras to watch a property while it is empty, it is one of the most valuable settings to turn on and test.